Brandt CAF100PX Manual De Instrucciones página 20

Step 3:
- The coffee grounds are separated from the drink by the pressure of the piston. Your coffee
is ready.
- Leave the piston completely lowered and pour your coffee.
To choose the Keep Warm function press the Power button once immediately after the water has
finished heating. The coffee machine temperature will be kept at 70°C which is ideal for serving
coffee.
To stop the Keep Warm function just press the Power button for 3 seconds or take the coffee
machine off the base.
If the filter is blocked or it is difficult to depress the piston, remove it from the machine,
stir the mixture gently and repeat the operation.
If you use excessive pressure you risk making hot liquid come out of the container.
 Tea (90°C)
- Put the coffee machine on a dry, flat, non-slip surface, out of reach of children and plug it
in
- Pull the piston up vertically and take it out Fill the coffee machine with water. The water
level must not exceed the "MAX" sign (1 l)
- Close the lid and put the coffee machine on its base.
- Press once on the Power button to heat the water. The indicator light comes on at 90°C
and the water starts to boil.
- Once the water is hot the light flashes. Delicately lift the lid of the coffee maker holding
the handle firmly. Put the tea in the hot water (about 1 teaspoon per cup)
- Put the lid back on placing the piston at the top of the machine. Do not press on the piston
and leave the mixture to infuse to your taste.
- Hold the pot firmly and press gently downwards on the piston with your hand. For best
results, maintain a minimum pressure, pushing the piston down slowly and regularly.
If you use excessive pressure you risk making hot liquid come out of the container.
To choose the Keep Warm function press the Power button once immediately after the water has
finished heating. The coffee maker will keep the temperature at 90°C. It will maintain this
temperature for 25 minutes and then stop if no tea is served.
20