S&P VAPZ Serie Manual De Instrucciones página 13

Connection capacity of terminals (fl exible multistrand conductors with plug or rigid conduc-
tors of section): 1 to 2.5 mm².
Electrical insulation class: 1.
Casing: IP protection rating: IP55.
Material: ABS V0.
Colour: RAL 7035.
Supplied with 4 cable glands: 2 x Pg7 + 2 x Pg11.
Storage: -20°C to +60°C.
Relative humidity: 30 to 90%.
Operating environment:
Maintenance: none required; we recommend checking the condition and tightness of con-
nections at regular intervals, and making sure ambient temperature is within the acceptable
range for the regulator.
Standard compliance: CE conformity certifi cate available on request.
Electrical connections should conform to personal safety standards NF C 15-100.
Measuring points and
trimmers for adjusting Emin,
Emax, Smin and Smax.
From left to right:
switches S1.1, S1.2 and
S1.3.
Supply
230V 50Hz
Don't forget the earth connection!
The installation should be protected by a suitable thermal-magnetic circuit breaker loca-
ted upstream.
Temperature: -10°C to +50°C.
Relative humidity: 30 to 95%.
Motor Relay output
Exit
Max. Start /
Speed Stop
13 13