Overview; Installation; Installing/Replacing The Lamp; Danger To Life - EuroLite PAR-64 Manual Del Usuario

OVERVIEW

The classic PAR-64s outdoor version
• Rugged aluminium housing
• Hole for safety rope at lamphousing
• 4 clip-to-hold clamps with spring locks for comfortable opening of the colour filter frame
• Comes fully-wired with black silicone cable
• Delivered with color filter frame
• Well-suited for easy installation of our Raylight reflectors with matching connector (GX16)
• Jet-proof construction for outdoor use

INSTALLATION

Installing/Replacing the lamp

Before replacing the lamp, unplug mains lead and let the lamp cool down (approx. 5 minutes).
During the installation do not touch the glass-bulbs bare-handed! Please follow the lamp manufacturer's
notes!
Do not install lamps with a higher wattage! Lamps with a higher wattage generate temperatures the device
was not designed for. Damages caused by non-observance are not subject to warranty.
For the installation, you need one PAR64/1000W GX16 lamp.

DANGER TO LIFE!

Only install the lamp with the device switched off!
Unplug from mains before!
CAUTION!
The lamp has to be replaced when it is damaged
or deformed due to the heat!
15/35
(1) Mounting-bracket
(2) Attachment eyelet
(3) Clip-to-hold clamps
(4) Housing
(5) Fixation screw
(6) Colour filter frame
42100980_V_1_1.DOC