Safety Instructions - Rehau FLIPDOOR Instrucciones De Montaje

Safety instructions

Retain this document and keep it close at hand.
Installation
▪ The cabinet must be fixed to a wall. Check whether the base is suitable. Select suitable
fastening devices. Secure the cabinet against tipping over with the wall bracket
included in the delivery. A defective cabinet or a cabinet that is not fixed to the wall
puts people at risk!
▪ Check that the wall cabinet fits securely following installation.
▪ If the wall cabinet contains lighting:
▪ Ensure that the power supply unit does not fall off when lifting the cabinet.
▪ Only connect the lighting to a socket, which complies with the technical data on the
power supply unit. The socket must be fitted close to the wall cabinet and be readily
accessible.
▪ Check the power supply cord prior to inserting the plug. The cord and the plug must
not be damaged (e.g. tears, cracks). Contact your distributor in the event of any
damage.
Application
▪ Ensure that no people or objects are within the swing range of the slats prior to
opening it. Take special care to ensure that no children sit or stand on the worktop in
front of the wall cabinet!
▪ Do not reach between the front slats, or the area of the lateral mechanism (slat
attachment) during the opening and closing process.
▪ Ensure that no objects block, or are able to damage the slats prior to closing it
(e.g. protruding cabinet content).
▪ Never force the wall cabinet open or closed. Please contact your distributor if the
cabinet cannot be opened/closed.
▪ Do not allow your children to play with or in front of the wall cabinet.
▪ If the wall cabinet contains lighting:
never cut off the plug from the power supply cord nor replace it with a different plug.
Cleaning and maintenance
▪ Only use microfibre cloths, do not utilise any aggressive or abrasive cleaning agents!
Please refer to www.rehau.com/TI
▪ The safety and correct function of the wall cabinet is only guaranteed with original
replacement parts and without structural alterations.
▪ Contact your distributor in the event of malfunctions.
▪ If the wall cabinet contains lighting:
▪ Remove the plug from the socket or remove the fuse prior to cleaning the lighting.
▪ Contact your distributor in the event of defective lighting.
(RAUVISIO crystal) for further information.
13 EN