Operating Instructions; Control Panel Operation; Menu Map; Configuration (Dmx) - Chauvet eclipse RGB Manual De Usario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

4. O
PERATING
Control
Panel
Operation

Menu Map

Configuration
(DMX)
Starting
Address
Rev. 8 ML
I
NSTRUCTIONS
To access the control panel functions, use the four buttons located underneath the
display. Please refer to the Product Overview to see the button locations on the control
panel.
Button
Press to find an operation mode or to back out of the current menu
<MENU>
option
<UP>
Press to scroll up the list of options or to find a higher value
<DOWN>
Press to scroll down the list of options or to find a lower value
<ENTER>
Press to activate a menu option or a selected value
Mode
Programming Steps
Automatic
Programs
Sound
S 0
Sensitivity
Manual LED
LEd
Control
DMX
001
Addressing
Slave Mode
Set the product in DMX mode to control with a DMX controller.
1.
Connect the product to a suitable power outlet.
2.
Turn the product on.
3.
Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket on the product.
When selecting a starting DMX address, always consider the number of DMX channels the
selected DMX mode uses. If you choose a starting address that is too high, you could
restrict the access to some of the product's channels.
The Eclipse™ RGB uses up to 12 DMX channels in its 12-channel DMX mode, which
defines the highest configurable address to 500.
If you are not familiar with the DMX protocol, download the DMX Primer from the
www.chauvetlighting.com.
To select the starting address, do the following:
1.
Press <MENU> repeatedly until 001 shows on the display.
2.
Press <ENTER>.
3.
Use <UP> or <DOWN> to select the starting address.
4.
Press <ENTER>.
Function
AuF
Automatic Mode, Fast
AuS
Automatic Mode, Slow
Sou
Sound Active Mode
rdn
Random Effect Mode
Adjust sound sensitivity for Sound-Active
S 0-S 9
Mode
rgb
(r 0-r 9)
(g 0-g 9)
Manually adjust the LED color and strobe rate
(b 0-b 9)
(Sr0-Sr9)
FdE
Manually adjust the LED color fade speed
(Sp0-Sp9)
001-509
Set DMX starting address
SLA
Sets Slave Mode
12
Description
Eclipse™ RGB User Manual

Publicidad

Tabla de contenido
loading

Tabla de contenido