Makita HP2040 Manual De Instrucciones página 7

MAINTENANCE
CAUTION:
Always be sure that the tool is switched off and
unplugged before carrying out any work on the tool.
Cleaning vent holes (Fig. 10)
Periodically clean the vent holes to prevent them from
being clogged with dust, dirt or the like.
To maintain product safety and reliability, repairs, mainte-
nance or adjustment should be carried out by a
Makita Authorized Service Center.
ACCESSORIES
CAUTION:
• These accessories or attachments are recommended
for use with your Makita tool specified in this manual.
The use of any other accessories or attachments might
present a risk of injury to persons. Only use accessory
or attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita service center.
• Carrying case
• Depth gauge
• Chuck key
• Blow-out bulb
• Hole saw 79 mm and 95 mm
• Safety goggle
• Tungsten-carbide tipped bit
• "M" stands for max. drilling depth.
• Phillips bit (For HP2040 and HP2041)
• Slotted bit (For HP2040 and HP2041)
7