Operating Instructions; On / Off; Charging Battery; Indicator Light - wikango WK800 Manual Usuario

INDICATOR LIGHT

LIght
Type of lighting
IV. OPERATION INSTRUCTION
1) On / off: Briefly press the power button to turn it on, and press
again to turn it off. While plugged into the car charger, the camera
automatically turns on and will start recording video when the engine
is started. When you unplug from the car charger, the images will
be automatically saved and the display will turn off. It is possible for
the camera to continue recording while having energy stored in the
supercapacitor.
2) Charging the Battery: Plug in the power cable, and the red indicator
light will be on, indicating the battery is charging. The red light dims as
battery charges up. When fully charged the red light will turn off.
3) Basic functions 1. There are three modes available: - Video mode:
Playback of SOS video snapshots - Video setting mode: Resolution
- Loop recording - HDR - Exposure Compensation (EV) - Motion
detection - Audio / video date mark - G sensor - Parking monitoring
- System configuration mode: Wifi - Date / time - Time synchronization
with GPS - Time zone - Speeding alert - Device name - Auto power off
- Beep sound - Language option - Screen saver - Frequency - Format -
Configuration Default – Version.

3. Operational functions:

- Video function: To activate the Video mode, press the OK button and
to stop recording press the OK button again.
- Photo function: Press and hold the Menu button (M), to switch to
snapshot mode, press the OK button to take the photo.
- Playback function: Press and hold the Menu button to switch to
the playback mode, press the up or down selection button to select
the sequence, press the OK button to play / pause the playback of the
desired video sequence.
ENGLISH I 20
Descripción
• Fixed red light on: Recharging
• Red light off: Recharge completed
• Blinking blue light: Video on
• Blue light on steady: video stopped