ColdKit Isark sin suelo Manual Del Usuario página 3

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

TYPES OF PANELS
Roof Panel
Vertical Panel
COLD ROOM WITH FLOOR (FLOOR PANEL)
The ISARK floor modular panels are manufactured in
polyurethane injected at high pressure, free from
CFCs and HCFCs. The ISARK standard floor panel is
recommended for conventional service demands.
The interior covering is:
10 mm plywood (CTBX) coated with a
brown non-slip phenolic resin.
Panel covered inside with a 0.6 mm thick
galvanised steel sheet and glued on 200 micron grey
PVC film.
The exterior finish in both cases is smooth
galvanised sheet steel 0.50 mm thick and lacquered
with a protective polyethylene film.
COLD ROOM WITHOUT FLOOR (PVC PROFILE)
In the case of ISARK for positive temperatures without
flooring the mini cold room is only assembled with
vertical and roof panels by inserting them into a PVC
profile after fixing it to the floor.
Corner Panel
VERTICAL AND ROOF PANELS
The ISARK vertical and roof modular panels are
manufactured in polyurethane injected at high
pressure 85 mm thick, free from CFCs and HCFCs.
Pay special attention to the difference between a
vertical panel and a vertical corner panel: the latter
also has attachment cam locks on the front.
EN

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Isark con suelo

Tabla de contenido