Other Methods Of Setting The Ip Address - Axis M3011 Guia De Instalacion

AXIS M3011/M3014 Installation Guide

Other methods of setting the IP address

This table shows alternative methods for setting or discovering the IP address. All methods are
enabled by default, and all can be disabled.
Use in operating
system
Windows
UPnP™
MAC OSX
Bonjour
(10.4 or later)
All
AXIS Dynamic DNS
Service
All
ARP/Ping
All
View DHCP server
admin pages
Note:
• UPnP™, DHCP and Bonjour are enabled by default in the AXIS M3011/M3014 Network Camera.
Notes
When enabled on your computer, the camera is automatically
detected and added to "My Network Places."
Applicable to browsers with support for Bonjour. Navigate to the
Bonjour bookmark in your browser (e.g. Safari) and click on the
link to access the camera's web pages.
A free service from Axis that allows you to quickly and simply
install your camera. Requires an Internet connection with no
HTTP proxy. See www.axiscam.net for more information.
See below. The command must be issued within two minutes of
connecting power to the camera.
To view the admin pages for the network DHCP server, see the
server's own documentation.
Page 11