DUAL CHARGE STATION FOR DUALSHOCK®4 CONTROLLERS
• INSTRUCTIONS MANUAL •
PACK CONTENTS
1x Dual Charge Station for DualShock®4 controllers (not included)
INPUT: 5V=1500mA
OUTPUT: 5V=750mA
1x USB AC Adaptor
INPUT: AC100V-250V 50/60Hz
OUTPUT: DC5V=2000mA
1x USB-miniUSB charging cable
1x Instructions Manual
PRODUCT DESCRIPTION
Dual Charging Station
USB AC Adaptor
USB-miniUSB charging cable
SETUP
• Before connecting the Double Charge Station, make sure that it is in perfect condition. Do not
use it if the product, the cable or the USB AC Adaptor is damaged.
• Connect the charging cable to the USB AC Adaptor and to your Double Charge Station.
• Next, plug the power supply unit into a mains outlet.
• Place the controller/s* in the connectors of the Charge Station to start the charging process.
• Double Charge Station LED indicator:
Red: Charging.
When the battery is fully charged, the LED indicator stays lit up in green.
Important: DO NOT USE CHARGERS THAT AREN'T serviceable and approved parts from Ardistel,
because it may damage the device and the warranty will be automatically cancelled. The
warranty will not be applied to products provided by other suppliers or if as a result of a misuse
you damage the product.
(*For more information, see the instructions manual according to your console model)
WARNINGS AND SAFETY MEASURES
• Keep in mind that the input voltage of the Charge Station is 5V. If you supply more voltage with
the USB cable, the unit can be overheated.
• Do not use if the product is damaged (Double Charge Station, AC Adaptor, cable, etc.).
5
EN