cecotec CONGA WinDroid 970 Manual De Instrucciones página 30

PAUSE
Pause the robot during cleaning by pressing Start/Pause button on the ro-
bot or on the remote control.
While the robot is paused, you can control the product's working direction
or working mode through the buttons on the remote control.
STOP
When cleaning is over, the product returns to the place where cleaning
started and beeps.
1. Remove the robot from the surface
Grab the handle and press Start/Pause for more than
5 seconds. Then, remove the product.
Conga WinDroid 970
30
2. Turn the robot off
Move the switch button to the "O" position.
3. Remove the safety suction cup
5"
CLEAN