Publicidad
Idiomas disponibles
Idiomas disponibles
This level has been designed to be a tow-maintenancetool However, in order
to maintain its performance, you must ALWAYS- f ollow these simple directions.
1. ALWAYShandle the tool with care°Treat it as you would any optical device,
such as a camera or binoculars_
2. AVOID exposingthe level to shock, continuousvibration or extreme hot or
cold temperatures.
3. ALWAYSstore the level indoors, When not in use, ALWAYSstore the level
in its protectivecase
4. When you are finished using the tool, ALWAYSmake sure that the switch
cover plate is in the full up and protected position°
5. ALWAYS keepthe level free of dust and liquids°Use
a damp cloth' and mild
soap to clean the tool. If needed, ONLY USE a soft cloth or cotton swab and
glass cleaner to clean the lens
z_WARNING:
ALWAYS remove the batteries when cleaning lens
6. ALWAYS clean and thoroughly
dry the tool after each use°
7. Check the batteries regularly to avoid deterioration
ALWAYS remove the
batteries from the tool, if it is not going to be used for an extended period
of time
8. Replace the batteries after approximately
40 hours of use
9. DO NOT disassemble
the Laser Trac
TM
level. This will not only void the
warranty, but could expose the user to hazardous radiation exposure
10. DO NOT modify the tool in any way or use the tool with products and/or
accessories
not specified by Sears, this could expose the user to hazardous
laser radiation exposure.
11. DO NOT attempt to change any part of the laser lens
12. Tool service MUST BE performed only by a Sears Parts and Repair Center.
Service or maintenance
performed by unqualified
personnel could result in
a risk of injury,,
13
Publicidad
