Zooming-in
1. Complete Steps 1 to 3 of "Using the WISELINK Menu". (Refer to page 65)
2. Press the ◄ or ► button to move to "Photo", then press the ENTER button.
The saved file information is displayed as a folder or file.
3. Press the ▲, ▼, ◄ and ► buttons to select a file, then press the ENTER button.
Pressing the button over a photo thumbnail displays the photo in full screen.
4. Press the INFO button to display the option(Slide Show, Rotate, Zoom, List).
Press the ▲ or ▼ button to select "Zoom", then press the ENTER button.
The enlarged photo image appears on the screen.
To enlarge a displayed photo, press the INFO button to open the Options window,
select the "Zoom" option and press the ENTER button.
Whenever you do this, the following zoom options are applied in sequence.
• The INFO button, the Rotate option and Enter must be pressed each time you
want to Zoom the picture. For example, from x 2 to x 4.
• Zoom(x 2): Zoom-in to the photo x2.
• Zoom(x 4): Zoom-in to the photo x4.
• Zoom(x 1): Restore the photo to its original size.
To pan up/down/left/right, press the ▲, ▼, ◄ and ► buttons.
Images with a resolution larger than 1280 X 720 are not supported.
To exit WISELINK mode, press the WISELINK button on the remote control.
English - 1
XTICK
861MB/994MB Free
Move
Enter
Up Folder
Forder1
Photo 0001
File 4
File 5
File 6
File 9
File 10
File 11
Select
Photo menu
Move
INFO
Slide Show
Rotate
Zoom
List
Exit
INFO
x 1
Return
Photo 0001
None
File 7
File 8
File 12
File 13
View
Return