Powerfix Profi+ 102875 Instrucciones De Servicio Y Seguridad página 50

Perform any servicing work after using and before storing the equip-
ment:
Clean the chain block thoroughly.
Lubricate the chain block properly at all times.
Lubricate the load hook chain and joint with oil.
Special attention must be paid to servicing when installing the chain block
outdoors.
Adjusting the Brake (Abb. 6 - 7):
m Attention:
All settings and servicing at brake system let carried out only by
trained specialist personnel!
- Remove the housing cover by loosening the 3 screws on the back of the
unit
- Remove the safety splint (Abb. 6/E)
- Fix the wheel for guiding the chain (Fig. 7 / D) by hand
- Now turn the adjusting screw (Fig. 6 / C Fig. 7) in the desired direction
m Note:
The wheel for guiding the chain (Fig. 7 / D) must be able to rotate
counterclockwise and clockwise. Do not tighten the adjusting screw
(Fig. 6 / C) to strongly.
- Rotating the wrench (Fig. 7 / K) in a clockwise direction increases the brak-
ing effect.
- Turn the wrench (Fig. 7 / K) anti-clockwise to reduce the braking effect.
- Insert the safety splint back on and secure it by prying..
m Note:
If the braking effect is losing return the unit to a specialist workshop
for inspection. Let's check the thickness of the brake discs at regular
intervals by a specialist workshop.
Load chain
The chain life is sufficiently dimensioned. Nevertheless, the life is
shortened due to external influences. If a length of 21 chain links 400
mm is exceeded, the chain must necessarily be replaced.
Length of 21 chain links
44 GB