Mp3/Wma Functions - Silvercrest KH 2311 Instrucciones De Uso

Programme playing order
You can programme an order in which the titles of a CD
are to be played. 32 programme slots are available for this
purpose. Programming is only possible when playback is
stopped.
Press the button
PROG/CLOCK-ADJ.
In the display appears the notice "PROG" and the pro-
gramme slot 1 (P - 0 1) of the title which is to be played first
with the programmed playback.
Select with the buttons
the desired title for the indicated pro-
SKIP/SEARCH
gramme slot. In place of the programme position indicator
the display now shows the CD titles available for selection.
To save the selected title press the button
on the device.
To programme further titles, repeat the previously described
steps. When all programme slots are occupied FUL will be
shown in the display.
Starting the programmed title list.
When you have programmed all desired titles you start
playback by pressing the button
on the device and/or on the remote control.
BAND
If you press the button
and/or
STOP/FM MONO/ST.
you will end playback, however, the device remains in
programme mode.
If you press the button
and/or
STOP/FM MONO/ST.
twice you delete the programme and the device exits the
programme mode.
The programmed title sequence is deleted when you open
the CD compartment, switch to another mode of operation or
switch off the Micro system. The notice "PROG" is erased in
the display.

MP3/WMA functions

"MP3" denotes a process and/or format developed by the
Fraunhofer Institute for the compression of audio data. In the
MP3 format compressed music pieces are only a fraction of
their original size, which, for example, on CD-Rs/CD-RWs
allows for storage of a considerably greater volume of music
than on commercially available audio CDs, on which audio
data is stored in the CDA format. Indeed the audio quality is
scarcely reduced by the process.
"WMA" is a process and/or format developed by Microsoft
for the compression of audio data. The compression process
is largely comparable to the MP3 process.
MP3/WMA title playback
Place a CD with MP3/WMA files into the CD compart-
ment. The device will now read the CD. In the display ap-
pears the notice "MP3" and/or "WMA" and, alternating,
the number of the available folder and the number of the
disc title.
on the device.
and/or
SKIP/SEARCH
PROG/CLOCK-ADJ.
/
PLAY/PAUSE/
on the device
STOP/FM MO/ST.
on the remote control
on the device
STOP/FM MO/ST.
on the remote control
Playback of the CD starts automatically and in the display
appears the playback symbol
number the display shows the number of the folder from
which is currently being played (i.e. F01 as the 1st. folder in
alphabetical order).
If the MP3/WMA CD contains several folders proceed as
follows:
To select a folder before the start of playback press,
repeatedly, the button
remote control.
Press the button
vice and/or on the remote control to start playback with
the files in this folder. After the files from this folder have
played back the device switches to the next alphabetical
folder.
To select another folder during playback press repeatedly
the button
FOLDER
Playback stop/resume
During playback press the
button on the device and/or on the remote control to stop
playback. With stopped CD playback the number of the
currently playing title and the pause symbol
display.
To resume playback press the
button once more.
Stopping playback
Press the button
button
STOP/FM MONO/ST.
Next/previous title
To playback the next MP3/WMA title on the CD press
the button
SKIP/SEARCH
remote control.
To playback the previous MP3/WMA title from a CD
press twice briefly in succession the
ton on the device and/or on the remote control.
Search forward and backward
You can activate a search to look for specific passages within
an MP3/WMA title.
For this, during playback, hold down the button
SKIP/SEARCH
SKIP/SEARCH
location in the title is reached.
Programming an MP3/WMA title sequence
You can programme the sequence in which the titles of an
®
MP3/WMA CD are to be played back. 99 programme slots
are available for this purpose. This is only possible when the
play function has been stopped
Press the button
PROG/CLOCK-ADJ.
In the display appears the notice "PROG" and the pro-
gramme slot 1 (P - 0 1) of the title which is to be played first
with the programmed playback.
Select with the buttons
the desired folder for the indicated pro-
SKIP/SEARCH
gramme slot.
- 43 -
. Alternating with the title
or
FOLDER FOLDER
/ on the de-
PLAY/PAUSE/BAND
or on the remote control.
FOLDER
/
PLAY/PAUSE/BAND
/
PLAY/PAUSE/BAND
on the device or the
STOP/FM MO/ST.
on the remote control.
on the device and/or on the
SKIP/SEARCH but-
(Search forward) and/or the button
(Search backwards) until the desired
on the device.
and/or
SKIP/SEARCH
on the
blink in the