Environmental Protection - skill F 000 624 016 Manual De Instrucciones

While charging, the charger and the battery
may become warm to touch, this is normal
and does not indicate a problem.
While charging, the charger and the battery
may become warm to touch, this is normal
and does not indicate a problem.
Do not charge at temperatures below 0° C
and over 40° C.
When you charge the battery for the first
time, it only accepts 80% of its maximum
capacity; after several charges and
discharges, however, the batteries should
be at full capacity and deliver maximum
performance
Do not repeatedly recharge the battery after
only a few minutes of operation; this may
result in a reduction of operating time and
battery efficiency.
The battery must be kept separate from the
natural environment and should not be
disposed of as normal domestic waste. Do
not use tool or charger when damaged; take
it to one of the officially registered SKIL
Service Stations for a safety check.
Maintenance
Unplug charger from power source
§
before cleaning.
The unit is is maintenance-free.
For safe and proper working, always keep
the machine and the ventilation slots clean.
Keep tool and charger clean.
- The charger may be cleaned most
effectively with compressed air (wear
safety goggles).
- Clean charging contacts in charger with
alcohol or contact cleaner.
If the machine should fail despite the
rigorous manufacturing and testing
procedures, repair should be carried out by
an authorized customer services center for
SKIL Power Tools
Guarantee
We guarantee SKIL appliances in
accordance with
Statutory/country-specific regulations (proof
of purchase by invoice or delivery note).
Damage attributable to normal wear and
tear, overload or improper handling will be
excluded from the guarantee.
In case of complaint please send the
machine, undismantled, to your dealer or
the SKIL Service Center for Electric Power
Tools.
Warning!
Freight and insurance costs are charged to
the client, even for warranty claims.

Environmental protection

Recycle raw materials instead of
disposing as waste.
The machine, accessories and packaging
should be sorted for environmental-friendly
recycling.
The plastic components are labeled for
categorized recycling.
The battery must be kept separate from the
natural environment and should not be
disposed of as normal domestic. Do not use
tool or charger when damaged; take it to
one of the officially registered SKIL
Service Stations for a safety check.
Subject to change without notice
9