LaserLiner PipeControl-LevelFlex-Camera Manual De Instrucciones página 6

Read the operating instructions and the enclosed brochure „Guarantee and additional notices"
!
completely. Follow the instructions they contain. This document must be kept in a safe place and
passed on together with the device.
Function / Application
The PipeControl-Level/Flex camera is a camera unit with integrated self-levelling that can be connected to
the VideoControl-Master base unit. The stand-up reel with a cable length of 30 m allows for inspections
over great distances. Working with the base unit, colour video images are sent to the LCD for inspecting
all places that are difficult to access such as cavities, air shafts, in masonry or in heating and ventilation.
4
5
Length measure
1
The PipeControl-LevelFlex-Camera features an integrated metre
counter. The reeled off number of metres appears on the display
of the VideoControl-Master (see image). Settings can be changed
by means of the base unit. For more information, see:
VideoControl-Master, Section 8.6 Length measure.
06
GB
1
2
3
9
8
6
7
1 Fastening screw for
VideoControl-Master
2 Holder for
VideoControl-Master
3 Locking screws
4 Connection for control cable
5 Glass-fibre reinforced
push rod, 30 m
6 Flexible coil spring
7 Camera head with
12 high-power LEDs
8
Control cable
9 Integrated metre counter
2012/01/05 12:50:28
0 cm X 1.0
CAMERA