LaserLiner PipeControl-LevelFlex-Camera Manual De Instrucciones página 8

Roll up push rod
4
To roll up the push rod properly,
push the cable into the reel.
!
The cable should not be rolled up by turning the reel.
Instructions for use
• The device must only be used in accordance with its intended purpose and within the scope
of the specifications.
• It is absolutely vital to ensure that the PipeControl-LevelFlex-Camera does not come into contact with
chemicals, current, moving or hot objects. This can damage the device and put its user at risk of
serious injury.
• The camera head is not acid-resistant or fireproof.
• Do not use the device in environments containing explosive gases or vapours.
• The PipeControl-LevelFlex-Camera must not be used for medical examinations/examining people.
• The unit is not suitable for taking measurements close to dangerous voltages. Therefore always make
sure that conductive parts are at zero potential when carrying out measurements in the vicinity of
electrical systems. Safe isolation from the power supply and precautions to prevent systems being
switched on again must be ensured by implementing suitable measures.
• Clean the push rod with a damp cloth before rolling it up.
• Wherever possible leave the plug connections connected to the cable when cleaning the spindle.
• To roll up the push rod properly, push the cable into the reel. The cable should not be rolled up by
turning the reel.
08
GB