Maintenance - Technical Data - Quick LDIM-BUS-2CH Manual De Uso Y Mantenimiento

DIMMER 2CH - REV003A
CLEANING
The device requires no special cleaning procedure. Clean the front using a damp cloth, avoiding corrosive substances.
Do not apply liquids directly on the unit; they might penetrate and damage the device.
DISCONNECT THE POWER SUPPLY BEFORE CLEANING THE UNIT.
WARRANTY
Failure to comply with the prescriptions below will void the Warranty.
TECHNICAL DATA
MODEL
INPUT CHARACTERISTICS
Power supply
Power consumption
Electronic overcurrent protection on outputs
Logic circuit working current
Logic circuit protection
No. output channels
No. inputs
GENERAL
Operating temperature
Storage temperature
Relative humidity
Housing protection
Dimensions (W x H x D)
Casing material
Casing colour
Certifications
Housing
F
In case of discordance or errors in translation between the translated version and the original text in the Italian
language, reference will be made to the Italian or English text.
F
Quick reserves the right to modify the technical characteristics of the equipment and the contents of this manual
®
without prior notice.
QUICK SPA

MAINTENANCE - TECHNICAL DATA

Max 4A per channel
from +5°C to +50°C
from -40°C to + 70°C
15% 90% non-condensing
Self-extinguishing nylon
CE marking according to CEI EN 60945
11
LDIM-BUS-2CH
10 - 30 Vdc
Resettable fuse
100mA
Resettable fuse
2
2 dry contact
IP 20
53 x 63 x 90 mm
Grey RAL 7035
for DIN rail
EN