Koenic KWK 170 Manual De Instrucciones página 13

English
Thanks for your purchase of this KOENIC
product. Please read this manual carefully and
keep it for future reference.
Intended use
This appliance is only intended for heating
or boiling water. Only use according to these
instructions. Improper use is dangerous and will
void any warranty claim. Observe the safety
instructions.
Scope of delivery
• Water kettle
• Stand
• Instruction manual
Components
Lid
A
Lid button
B
Spout with filter
C
Handle
D
Water level indication
E
Thermometer
F
Power switch
G
Stand
H
Before first time use
• Fill the kettle with water to the MAX level
and operate it. Repeat this process
3 times. This will remove any residues
remaining from the manufacturing process.
Caution
Do not open the lid when steam is emitted
from the spout.
IM_KWK170_150318_V02.indb 13
Note
You can stop the boiling process at any time
by lifting the power switch.
The current water temperature can be read
on the thermometer.
When kettle not in use, store excess cord in
or around the stand.
Technical data
Rated voltage
Rated input power
Rated frequency
Using the kettle
Before use, plug in the kettle.
1
2 Open the lid by pressing the lid button.
3 Fill the kettle with water to the desired
level (MIN
Do not exceed the MAX level.
4
5 Close the lid and place kettle on stand.
6 Use the power switch to switch kettle on.
The kettle will switch off automatically,
7
2 to
once the water has boiled. Wait
15 to 20
After use unplug the kettle.
8
: 220-240
: 1850-2200
: 50/60 Hz
0.75 / MAX 1.7 L).
seconds before operating again.
V
W
13
18/3/15 10:25 am