Qlima EFE 2018 Instrucciones De Uso página 73

Remote control
Activate het stand-by mode. Press the on/
off button on the remote control to acti-
vate the light effect. The brightness can
be changed with the 'Dimmer' button.
The two heating modes can be activated
with the button '900W' and '1800W'.
The desired temperature can be set
(15-30˚C ) with the + and - buttons. The
standard setting is 20˚C.
The timer function can be (on/off) set
with the button 'Timer set".
The date and time can be set with the
date/time button. The date can be set
with the arrow buttons. The hours and
minutes can be set with the + and - but-
tons. Press the 'ok' button after chang-
ing the date or time to confirm the set-
tings.
There are ten settings possible for the
timer function. Each setting has a date,
'on' time' and 'off' time. The maximum
4
73