Powering Up; Using Ac Mains Power - Rosco LitePad Loop 1008 Manual Usuario

Powering Up

LitePad Loop comes with a multi-blade, 2.5Amp
Transformer. Select the blade style that is appropriate for
your locale and attach it to the transformer.
C
Insert the DC Barrel Connector of the transformer into the
power jack on the LitePad Loop as shown in Fig 11.1. You
can also use the right angle extension cable provided to
extend the transformer's power cord. Next, plug the
Fig. 11.1
12

Using AC Mains Power

transformer into an
appropriate mains power
outlet. An On/Off switch
next to the connector
powers the Loop on and
off.
Fig. 11.2
Power Cable Fully Connected.
Blades Included
North America
Australia
United Kingdom
Europe