Hema 80.03.0035 Instrucciones De Uso página 22

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

• The switch or control unit must not be allowed to get wet
during washing and that during drying the cord must be
positioned to ensure that water does not flow into the
switch or control.
Before storing, allow it to cool down.
Do not crease the appliance by placing items on top of
it during storage.
The appliance is not intended for medical use in hospital.
The appliance is not to be used by young children over the
age of three unless the controls have been pre-set by a
parent or guardian, or unless the child has been
adequately instructed on how to operate the controls
safely.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
The plastic bag around the blanket is used for hygienic
reasons.
The appliance is only to be used with the detachable
control unit TWK-1/T4K that are marked on the appliance.
When not in use, please follow the instructions of below
paragraph of the manual.
Regarding the instructions for appropriate settings of
controls for continuous use of the appliance, please refer
to the below paragraph of the manual.
Securing the electric under-blanket to your mattress
• Do not switch the blanket on while it is still in the box.
• The heat may cause fire.
• Do not place the electric blanket under flammable objects, especially paper or
curtains.
• Lay the electric blanket on a relatively hard and non-adjustable mattress. The blanket
must lie flat from your shoulders to your feet while you sleep. The electric blanket can
be spread out on either side. For easy operation place the side with the switch at
the level of your shoulders. The four loops at the corners of the electric blanket can
be used to attach it to the mattress. This will prevent the blanket moving or creasing.
• Caution: a creased part is likely to cause high temperatures, which is very dangerous.
• To keep the electric blanket smooth and clean and to prevent wear, cover the
blanket before use with a bed sheet. (Do not cover the blanket with another blanket
or cotton bedspread. These will not allow the heat from the blanket through.)
• When making the bed, check regularly that the electric under-blanket is still flat on
the mattress. The cord must not run over or under any heated parts of the blanket.
22

Publicidad

Tabla de contenido
loading

Tabla de contenido