Kasanova LEI002696NOC Manual De Instrucciones página 13

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

KETTLE WITH THERMOMETER
CHARACTERISTIC
1. High-quality temperature controller provides 100% boiling water, and the
plastic parts of the device that come into contact with food are suitable for
food, in compliance with the national standards of health care.
2. Built-in protection and more precise temperature controller for safer and
longer service life of the device.
3. Cordless Kettle and swivel base 360 provide ease of use.
4. Hidden heating element, high thermal power, long life, easy to clean.
5. The sleek body of the stainless steel kettle provides a beautiful appearance,
the material is durable and beneficial for health.
6. Fast heating: the water boils after 5 to 8 minutes of filling the kettle.
7. The water level is visible at first glance.
8. The indicator light indicates auto shut-off of the kettle after water boiling.
9. Elegant design and unique characteristics of the device meet the
requirements of the fast pace of life.
HOW TO USE
1. Open the lid of kettle, pour into the water and close the lid. In order to avoid
burns wait a moment after boiling. Water should not be below the minimum
level indication or above the maximum level indication.
2. Insert the plug into the socket, set the kettle on the base and turn the unit
on with the switch. Remember, do not turn the kettle on before placing it on
the base.
3. After boiling the kettle shuts off automatically.
4. Before pouring out water from the kettle, wait until the water stops boiling.
5. If the kettle automatically switches off before water boiling, it means there
are limestone deposits in the kettle, which need to be removed.
Fill the kettle with water up to the maximum level, then empty it after boiling.
Repeat this step and clean the kettle to remove the resulting odor.
CLEANING
1.Before cleaning, please disconnect the unit from the power supply by
removing the plug from the socket and allow the appliance to cool down.
2. Do not immerse the kettle, power cord, plug or outlet in the water.
3. Ensure that the electronic circuit wire is dry.
4. Wipe the body of the kettle with a damp cloth. Do not use scouring powder
or cleaning agents, as they may damage the surface of the kettle.
DESCALING
1. Use a product intended for descaling, follow the instructions for such a
product.
2. Pour 0.5 liters of white vinegar 8% into the kettle, leave for an hour, then
pour the vinegar out and rinse the kettle with clean water 4 to 5 times.
13

Publicidad

Tabla de contenido
loading

Tabla de contenido