Num'axes VIS1053 Manual De Instrucciones página 10

9. Maintenance
Lenses
− Do not wipe dust or sand from the lens, but rather blow it off or remove it using a soft
lens brush.
− Fingerprints may affect the lens surfaces after a time. The easiest way to clean lens
surfaces is to breathe on them and rub them using a clean optic-cleaning cloth.
− Use of a coarse cloth or unnecessary rubbing may scratch the lens surface and
eventually cause permanent damage.
− Do not use a velvet cloth or ordinary tissue, as it may scratch the lens surface.
− Once a cloth has been used for cleaning the body of the product, it should not be used
again for the lens surface.
− For a more thorough cleaning, photographic lens tissue may be used.
Main body
− Clean the body surface with a soft clean cloth. Do not use benzene, thinner, or any
other cleaners containing organic solvents.
Storage
− Water condensation or mold may occur on the lens surface because of high humidity.
Therefore, store the monocular in a cool, dry place. After use on a wet day or at night,
thoroughly dry it at room temperature, then store it in a cool, dry place.
10. Troubleshooting
Should your product stop working or develop a fault, first read this guide over, and then check
the battery and replace it if necessary. Also check that you are using the product correctly.
If the problem persists, contact your distributor or check out on www.numaxes.com.
You can also contact NUM'AXES at +33.2.38.69.96.27 or by email export@numaxes.com.
Depending on the extent of the malfunction, you may have to return the product for service
and repair.
For all repairs, please supply the following:
− the complete product
− the proof of purchase (invoice or sales receipt)
If you omit one of these items, the after sales service will have to invoice you for any repair
costs incurred.
VIS1053 - Indice A – Août 2020 10/30