Num'axes VIS1053 Manual De Instrucciones página 9

4. Power off / on
Press the « ON / OFF » button for approximately 3 seconds to activate the LCD display.
Press the « ON / OFF » button for approximately 3 seconds to turn off the LCD display.
5. Screenshot
Press the the « ON / OFF » button for 1 second to « freeze » an image, to take a screenshot.
Press the the « ON / OFF » button for 1 second to « unfreeze » an image, to desactivate a
screenshot.
6. Zoom in
Press the « ZOOM IN » button for 1 second to switch the digital zoom. You can switch from a
zoom X1, to X2, to X3 or even to X4 ...
7. Colors switch
Press the « COLORS SWITH » button for 1 second to switch the « CHANGEMENT DE
COULEURS » to scroll through the color palette.
7 different colors are possible:
- White hot,
- Purple hot,
- Rainbow,
- Amber hot,
- Iron hot,
- Black hot,
- Red hot
Press the "COLOR SWITCH" button for 3 seconds to display a small square on the hottest
area.
8. Cautions for use
− The VIS1053 thermal vision monocular has an uncooled microbolometer detector that
uses a highly sensitive thermal sensor. The lens must not be directed towards a source
of radiation (such as the sun, a laser beam or a reflective source ...) whether the
product is switched off or on. The product would then be permanently damaged.
− The lens is a fixed focus-free lens that does not need to be rotated during use,
otherwise it will cause image blur.
− Do not open the case or modify it.
− Keep the product out of reach of children.
− Do not use any power source other than a 3-V CR123 Lithium battery.
− Make sure the battery polarity is correct.
− Remove the battery from the product if you are not using it for an extended period.
VIS1053 - Indice A – Août 2020 9/30