Orbegozo MC 4600 Manual De Instrucciones página 9

MC 4600
• Care should be taken when using blades, when
emptying the bowl and during cleaning.
• Always disconnect the power if left unattended and
before assembling, disassembling or cleaning.
• Do not use your fingers to press the food, always use
the spatula.
TECHNICAL INFORMATION
The capacity of the container is 1.2 L
•
Special mechanism for easy blade removal.
•
It can be used with pulse action.
•
As the motor is very powerful, do not operate the machine for longer than 15 seconds at
•
a time. If necessary, leave the machine for a minute before using again.
The appliance can chop ice and meat.
•
Suitable for preparation of dressings and sauces.
•
You can use the blade to chop and/or grind your ingredients. Always cut the ingredients
•
into small pieces before adding them to the bowl. Do not use hard ingredients as these may
damage the blade insert.
USING YOUR CHOPPER
Place the base on the countertop and fit the bowl on top.
•
Pick up the blade and place the lower opening on the pin in the middle of the bowl
•
Now add your prepared ingredients to the bowl
•
Place the cover on the bowl so that the upper end of the blade slides into the opening in the
•
middle of the cover. When fitting the cover , please make sure the lugs on the inside of the
bowl slot inside the recesses on the cover .
Place the drive unit on the cover of the bowl Please ensure that the central splined spindle
•
on the underside of the drive unit slides into the opening on the blade and that the drive
unit is fully flush with the cover . You can see from the shape of the drive unit and the cover
how the two parts fit together. The appliance will only work if the two parts fit together
properly and the two notches on the cover fit inside the openings on the underside of the
drive unit.
CLEANING
Before cleaning and/or storage, always remove the plug from the electrical socket and allow
•
to cool down completely.
9