Dismantle the product before cleaning. Remove all inserts and the collecting container from the Nicer
Dicer Quick.
Do not use sharp or abrasive cleaning agents or cleaning pads.
Allow all parts to dry thoroughly before putting them away.
All parts without blades can be cleaned in the top basket of the dishwasher. Select an economy or stan-
dard programme. Avoid high-temperature programmes (such as sanitising or pot/ pan cycles).
We recommend hand-washing any parts that contain blades to preserve quality and sharpness over the
long term.
Note: Some types of fruit and vegetables can stain the plastic parts (e.g. beets). Frequent cleaning of
the collecting container in a dishwasher can affect the material's transparency. This is normal and not
a cause for concern; it does not limit the functionality.
Cleaning the blade inserts
Cleaning the pin block
6 Disposal
In the event that the product and/or accessories can no longer be used, they should be disposed of with
the household rubbish. It can be disposed of by the municipal waste management services.
The packaging material can be recycled. Dispose of the packaging in an environmentally
friendly way and take it to your recycling site.
If you have any questions about the device or spare parts/accessories, please contact your local retailer.
18
Instruction Manual
When you're cleaning the product, never touch the side with the
sharp blades.
If food residue is caught between the blades, twist the blade insert
to face upwards with the blunt side and carefully remove the food
residue using a dishwashing brush.
Clean the integrated pin block thoroughly with a dish brush. Make
sure you brush carefully through the vertical, horizontal and diagonal
recesses.