babymoov Bebedelice Manual De Instrucciones página 9

Bébédélice
EN
7. Turn the control button
button .
8. The indicator lamp lights up and the bottle heating cycle
starts. Warning: during the heating cycle steam will come
out of the opening on the hood. Keep your hands well away
to avoid getting scalded.
9. When the heating cycle has finished, there will be a beep
to tell you the bottle is ready. The appliance stops
automatically. Note: you can stop the heating cycle at any
time by pressing once on the "On/Off" button
10. Remove the hood using the top handle. Warning: the hood
gets very hot. Handle with care.
11. Remove the bottle immediately to avoid further heating by
the hot appliance. The bottle may be very hot, wait for it to
cool before handling. Warning: always shake the bottle
and check the temperature before giving it to your baby.
NOTE :
The bottles are heated by the steam heating the liquid in
them. The size, materials (glass or plastic) and quantity of
liquid will affect the final temperature of the contents. If the
bottles/jars are not hot enough, put a little more water in
the measuring tube. If the bottles/jars are too hot, reduce
the quantity of liquid in the measuring tube. Avoid leaving
the bottle in the tank when the heating cycle is over. The heat
remaining in the appliance will continue heating the bottle.
Leave the appliance to cool for at least 15 MINUTES between
each use.
G Sterilizing a bottle:
1. Check that the appliance's voltage rating is the same as
that of the mains power supply. If so, you can safely connect
the appliance.
2. Remove the cooking juices container, the cooking basket and
the hood from the appliance.
3. Leave the insulation plate in the bottom of the tank.
4. Remove the mixing bowl and fill it with 90ml water.
. Then press the "On/Off"
.
5. Pour the water into the bottom of the tank.
6. Place the clean bottle (with no traces of milk in it) upside down
in the bottom of the tank. Put the retaining ring and teat in
the tank beside the bottle.
7. Replace the hood.
8. Turn the control button to the
button .
9. The lamp lights up and the sterilization cycle starts. Warning:
during the heating cycle steam will come out of the opening
on the hood. Keep your hands well away to avoid getting
scalded.
10. When the sterilization cycle has finished, there will be a
beep to tell you the bottle is ready, and the appliance stops
automatically. Note: you can stop the sterilizing cycle at
any time by pressing once on the "On/Off" button.
11. Remove the hood using the top handle. Warning: the hood
gets very hot. Handle with care.
12. You can now take out the sterilized bottle and accessories.
Warning: the bottle is hot.
G Cleaning your Bébédélice:
- Always unplug your Bébédélice and make sure it is cold
before cleaning it.
- Bébédélice tank: wipe the heating element in the bottom of
the tank with a damp cloth or sponge. Use nothing but clean
water. Leave to dry. Do not immerse the Bébédélice in water
or any other liquid. Do not wash the Bébédélice under running
water. Do not use any cleaning product, just water.
- The measuring tube, container, insulation plate, hood, blades
and mixing lid can be cleaned with a sponge, hot water and
a little mild liquid detergent. Rinse with water and leave to dry.
they can also be placed in the dishwasher.
- Never use any abrasive produces or cleaning solvents to
clean the appliance. They may damage the appliance and
its surfaces.
9
position. Press the "On/Off"