Dsp Functions; Level - Harman AKG DMM 4/2/4 Stereo Instrucciones De Uso

Operation

DSP functions

The following signal processing functions are available for the input channels and the output
channel on the "SYSTEM CONTROL" rotary control:

LEVEL

In LEVEL mode the following channels can be changed in volume:
• all MIC/LINE input channels
• all AUX input channels
• master output
With a clockwise rotation, the adjustment range extends from -∞ to +12 dB (0 dBFS). The
adjustment takes place in the appropriate increments.
Figure 10: Division of the LED ring for the LEVEL function
At -∞ one LED lights up, at +12 dB (0 dBFS) the entire LED ring lights up.
Figure 11: Adjustment range for the LEVEL function
MUTE function:
Briefly pressing a rotary control causes the corresponding channel to be muted. The MUTE
function is indicated by the steady flashing of the LED ring. Another brief press of the rotary
control removes the MUTE function.
VU function:
NOTE
The "SYSTEM CONTROL" rotary control can be used to display the current audio level of the
inputs and outputs, see Operating DMM 4/2/4.
DMM 4/2/4 Stereo 41
www.audiovias.com