Yakima RipCord Manual De Instrucciones página 3

b To carry a surfboard(s):
Loop RipCord strap under
far side of crossbar. Bring
Pull strap end to tighten Ripcord down.
strap over board, and under
Gather extra strap and secure it.
near side of crossbar.
Push and hold button,
then thread strap through
underside, and out the
front of RipCord lock.
If you have loaded multiple boards RipCord
is to be installed around all boards.
Lock both RipCords.
1033509B-3/12