Cleaning And Maintenance - cecotec Bamba SkinCare Silky Manual De Instrucciones

Use
Warning: Make sure that the appliance is fully charged before you start to use it. It is not
possible to run the appliance from the mains when the battery is empty.
1. To change or remove the grinding roller, press the release button on the side with one
hand and pull it out with the other.
2. When treating highly-callused areas, use the coarse grinding roller.
3. When treating slightly-callused areas, or smoothing skin, use the fine grinding roller.
4. Slide the on/off switch downwards to turn the device on and off.
04222_Bamba SkinCare Silky_Manual_YV01190719.indd 17 04222_Bamba SkinCare Silky_Manual_YV01190719.indd 17
5. Do not exert heavy pressure on your feet and always guide the device carefully over
the surface to be treated.
6. Move the instrument under light pressure in circular movements slowly over the parts
to be treated. Do not move the appliance too fast.
7. Note that the cutting attachments will have a reduced effect if the skin is softened or
moist. For this reason, do not carry out any pre-treatment in a bath.
8. Do not remove all the skin in order to retain the natural protection of the skin.
9. After every use, apply moisturizing cream to the parts treated.

5. CLEANING AND MAINTENANCE

• Turn off and unplug the device from the power supply before cleaning ir, assembling or
disassembling any of its parts.
ENGLISH
BAMBA SKINCARE SILKY
17
9/3/20 16:43 9/3/20 16:43