VOX electronics VF2510F Manual De Usuario página 14

Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
• Ensure the unit is unplugged and empty.
• To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on
something solid so that it will not slip during the door reversing process.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• It is preferable 2 people to handle the unit during assembly.
• This refrigerating appliance is not intended to be used as a built-in appliance.
1. Remove two screws at rear side of top cover.
2. Remove top cover and thermostat knob, and then place it aside.
3. Unscrew top hinge and then remove door and place it on a soft pad to
avoid scratch.
4. Unscrew bottom hinge. Then remove the adjustable feet from both
sides.
11