VOX electronics MX-9108 Manual De Usuario página 4

1
For the first use, cleaning the beaters. Before assembling the mixer, be sure the power cord
is unplugged from the power outlet and the speed selector is on the "0" position.
1. Choose the proper attachments based on the task to be performed and assemble it
in position. Beaters are for mixing egg white or mixing other liquid.
2. Finish the setting, then connect to power supply.
3. Dial the speed selector to your desired setting and the appliance will start working.
There are 5 settings and the speed will achieve the highest if the turbo button is depressed
at any time.
Warning: Do not place knife, metal spoon, fork and so on into bowl when
operating.
4. The max operation time per time shall not exceed 2 minutes, then have a rest for an
appropriate time until your hand / stand mixer cooling between two consecutive cycles.
When kneading yeast eggs, we suggest that the speed selector should be at low speed
firstly and then use high speed to achieve the best results.
5. When mixing is completed, turn the speed selector to 0 position, unplug the cord from
power outlet.
3
2
USING YOUR HAND/STAND MIXER
4
5
6
7
1. Beater
2. Ejector bracket
3. Speed selector
4. Turbo button
5. Handle cover
6. Upper body
7. Lower body
3