Dörr ZB-200 PV Manual De Instrucciones página 13

05.2 Inserting/removing the micro SD memory card
CAUTION: When inserting or removing the micro SD memory card, the night vision binoculars must be switched off (no
live view display)!
Open the rubber cover (09a) and insert a micro SD memory card (optional) into the micro SD card slot (09), until it clicks into place.
Please make sure that the labelled side of micro SD card is facing upwards. We recommend using a micro SD/SDHC card with a
capacity from 4 GB to max. 32 GB.
When the micro SD memory card is inserted correctly, the LCD display (11) shows the symbol
If the micro SD memory card is not inserted correctly or if it is missing or defective, the LCD display (11) shows the symbol
To remove the micro SD memory card, first push it further into the micro SD card slot until it releases with a click – then the micro
SD memory card can be removed completely.
Note
If you want to use a micro SD memory card that still has files on it, we recommend that you save these files on your computer
And format the micro SD card before use.
05.3 Fastening the neck strap
To prevent the night vision binoculars from falling down, we recommend using the supplied neck strap. To fix the neck strap pull
the two loops through the eyelets (10) of the night vision binoculars and fasten them with the buckles.
05.4 Mounting onto a tripod (optional)
With the ¼" tripod socket (15) the night vision binocular can be mounted onto a tripod (optionally available from DÖRR).
06 | OPERATION
CAUTION: Never look through this night vision binoculars at the sun! You may blind yourself!
Note for eyeglass wearers
If you wear glasses, please keep them on while using the night vision binocular to ensure best image results.
06.1 Switching on
To switch on the night vision binoculars, press the On/Off button (03). The LCD display (11) shows a coloured live view.
06.2 Focusing
To focus the night vision binoculars, turn the focusing wheel (12) to the left or right until the live view in the LCD display (11) is sharp.
06.3 Digital zoom
To zoom-in the live view, press the zoom button (08). In the right bottom of the LCD display (11) the symbol
the minimum zoom factor of 1,07. By repeatedly pressing the zoom button (08), the live view can be magnified in steps up to 2
times. To return to the 1: 1 image, press the zoom button (08) repeatedly until the symbol in the display disappears.
13
.
appears and indicates
doerr-outdoor.de
.