B) Ptfe Clamp Rings; C) Surfox Electrolyte Solutions; D) Mounting A Cleaning Pad - Walter Surface Technologies SURFOX 304 MIG TIG Manual Del Usuario

7
Large wand accessories

B) PTFE clamp rings

PTFE clamp rings are designed to hold the cleaning pads
on the tungsten inserts.
They are available in two sizes:
Narrow clamp ring for narrow pads
No: 54-B 020
Use with narrow inserts. 10 per package.
Clamp ring for standard cleaning pads
No: 54-B 002
Use with standard inserts. 10 per package.

C) SURFOX electrolyte solutions

Surfox electrolyte solutions are specially formulated phos-
phoric acid cleaning solutions designed to be used only in
Walter SURFOX systems.
SURFOX-G
Electrolyte Cleaning Solution
Cleans up to 3-5 feet per minute.
1.5 L/50.7 oz.
STD Pack: 1 STD Carton: 4
5 L/1.3 gal.
1 STD Pack: 1 STD Carton: 1
20 L/5.2 gal.
STD Pack: 1 STD Carton: 1
208 L/55 gal.
STD Pack: 1 STD Carton: 1
SURFOX-T
Heavy-Duty Electrolyte Cleaning Solution
Cleans up to 3-5 feet per minute.
1.5 L/50.7 oz.
STD Pack: 1 STD Carton: 4
5 L/1.3 gal
1 STD Pack: 1 STD Carton: 1
20 L/5.2 gal.
STD Pack: 1 STD Carton: 1
208 L/55 gal.
STD Pack: 1 STD Carton: 1
12

D) Mounting a cleaning pad

1. Squeeze and insert clamp ring.
2. Insert cleaning pad.
No: 54-A 065
3. Firmly press in tungsten tip.
No: 54-A 066
No: 54-A 067
No: 54-A 068
No: 54-A 005
4. Remove tip with installed pad and clamp ring.
No: 54-A 006
No: 54-A 007
No: 54-A 008
Note: When mounting classic pads, ensure the Ω sign
is facing up on step 2.