Install The Battery Pack; Remove The Battery Pack; Operation; Start The Machine - GreenWorks Pro PTB308 Manual Del Operador

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

EN
8.3

INSTALL THE BATTERY PACK

If the battery pack or charger is damaged, replace the
battery pack or the charger.
Stop the machine and wait until the motor stops before
you install or remove the battery pack.
Read, know, and do the instructions in the battery and
charger manual.
1. Align the lift ribs on the battery pack with the grooves in
the battery compartment.
2. Push the battery pack into the battery compartment until
the battery pack locks into place.
3. When you hear a click, the battery pack is installed.
8.4

REMOVE THE BATTERY PACK

1. Push and hold the battery release button.
2. Remove the battery pack from the machine.
9

OPERATION

Do not put your fingers into the notches or in position
where they can get cut.
Do not touch the blade unless you remove the battery
pack.
Do not use the machine if the blade is damaged or bent.
Remove all objects such as cords, lights, wire, or string
which can become entangled in the cutting blade and
create a risk of personal injury.
WARNING
English
If the blade jams on an electrical cord or line, DO NOT
TOUCH THE BLADE! IT CAN BE LIVE AND
DANGEROUS. Do the steps below:
1. Hold the insulated rear handle or put the machine down
and away from you.
2. Disconnect the electrically service to the damaged line
or cord before you try to free the blade.
9.1

START THE MACHINE

5
1. Pull the safety lock button using your thumb and then
squeeze the trigger.
2. Release the safety lock button.
Hold the machine with two hands during operation.
9.2

STOP THE MACHINE

1. Release the trigger to stop the machine.
8
WARNING
6
WARNING

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido