Pir Sensitivity; Temperature Unit; Date /Time Stamp - MINOX DTC 600 Manual De Instrucciones

will take you to the submenu. In the submenu you can
set the desired time frame by pressing the arrow keys
(Up/Down). Press the OK button to store the setting.
Press the menu button to return to the main menu.
PIR Sensitivity: Setting the IR-sensor
sensitivity
Your MINOX DTC 600 has the option to set the IR-sensor
sensitivity to one of three levels - low, medium and high.
This feature is especially useful to avoid accidental trig-
gering of the camera by movements caused by branches,
grasses or other non-relevant moving objects.
To adjust the sensor's sensitivity, press the DOWN ar-
row key until you arrive at the PIR sensitivity menu
item. Then press the right arrow button to enter the
submenu. Here you can choose between "Low", "Nor-
mal" and "High" by pressing the up or down arrow
keys. Press OK to verify your selection. You will then
automatically return to the main menu and the setting
will be saved.
Please note:
The detection range of the IR sensor is dependent on
external factors such as the temperature in the vicinity
of the camera.
To provide a general guideline for the best setting, we
recommend the following IR sensor settings:
High (high sensitivity) > generally in the summer or
when the surrounding temperature is about body tem-
perature of the detected object.
Normal (medium sensitivity) > generally in spring or
autumn or during times of the year within these typical
temperature ranges.
Low (low sensitivity) > generally in winter or during
times of the year within these typical temperature
ranges.

Temperature unit

With this setting you can adjust the unit of tempera-
ture to degrees Fahrenheit or Celsius. Go to the menu
item "Temperature unit" in the menu and press the OK
button or the right arrow key. This will take you to the
submenu. In the submenu press the arrow keys (Up/
Down) to adjust the setting to degrees Fahrenheit or
Celsius. Press the OK button to store the setting.
Date / time stamp
This setting allows you to mark and display information
31