Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
3. ATTAcH cRoSS RAilS AnD coVeR RAilS To FRonT enD RiB
A. Assemble 2 Cover Rails using parts as shown.
B. Assemble 3 Cross Rails using parts as shown.
C. Connect the Cross Rails to the End Rib at the ShelterLocks.
D. Place a Cover Rail at each leg and secure it with a Cover Clamp as shown. Slide the Cover Rails so they
are 8 inches up from the ground. Only HAND-TIGHTEN these bolts!
ShelterLock II
connections use #03032 (1
®
Assemble Cover Rails
A
13345
800163
No Bolt at this connection
Assemble Cross Rails
B
10115
800599
800599
01010
4. connecT FiRST MiDDle RiB To FRonT enD RiB
ShelterLock II
connections use #03032 (1
®
Cross Rails face toward the inside of the AutoShelter.
800939
/
7
") Bolts. Cover Rail Clamp connections use #10115 (1
8
Cross Rails
Cover Rails
/
7
") Bolts. Cover Rail Clamp connections use #10115 (1
8
13201
800939
noTe:
The bolt heads at
the end ribs must be facing
outward to avoid damaging
your cover.
800939
800939
13201
Page 5
ShelterLock II
®
End Rib Connection
c
800939
Cross Rail
End Rib Cover Rail Clamps
D
13202
10115
Cover
Rail
01011
01010
Middle Rib Cover Rail Clamps
Middle
13201
Rib
01011
01010
/
5
") Bolts.
8
03032
01010
End Rib
/
5
") Bolts.
8
10115
Cover Rail
05_62684_0B
Publicidad
Tabla de contenido
