Prior To The First Measurement; Setting Date, Time, And Unit Of Measure; Selecting The User - Soehnle SYSTO MONITOR 180 Instrucciones De Manejo

PRIOR TO THE FIRST MEASUREMENT

Setting date, time, and unit
of measure
GB
Date and time must be set prior to
using the blood pressure monitor so
that every measurement value that
is stored can be time stamped.
1. If the device is switched off, push
the key ( ) to display the time.
Then push and hold the key ( )
to set the year.
2. Push the key ( ) to change the
[YEAR]. Each time you push the
key, the year increases by one.
3. Once the year has been set, push
key ( ) to save the information
and continue.
4. Repeat steps 2 and 3 to set
[MONTH], [DAY], [HOUR], [MINU-
TE] and [UNIT OF MEASURE]
You can switch between the unit of measure
"kPA" (kilo pascal) or "mmHg" (millimetre
mercury column), where mmHg is the most
common unit for measuring blood pressure.
5. After setting the unit of measure,
the LCD display shows "done" and
then displays all settings entered
by you before switching off.
22 22

Selecting the user

A total of two users can be program-
med. 60 datasets can be stored for
each user.
1. If the device is switched off, push
the key ( ) to display the current
time and selected user.
2. Push key ( ) again to select
between user 1, 2 ( ) .
3. Push key (
switch the device off.
) to confirm and