5. Outdoor Camera Installation
1. Take out the screws located at the bottom of the outdoor camera (picture 1), and take
apart the bracket.
2. Take out the four screws in the back cover, and then take apart the front cover (Pic. 2).
3. Take off the name plate for marking family name or room name, and then fix the screws
of the back cover (Picture 3).
4. Install the outdoor camera at a height of 1.4m-1.7m, and make sure it avoids the direct
sunshine or rain (Picture 4).
5. Fix the bracket of the outdoor camera on the wall by tightening screws,and then fix the
screws at the bottom of the outdoor camera (Picture 5).
6. Notices of Wiring Diagram
The video door phone kit includes 15 meters wire. If wanting extension to 15- 50 meters,
please use the 4×0.5mm2 wire; If wanting extension to 50-100 meters, please use the
4×0.75mm2 wire.