babymoov Station Bien-Etre Instrucciones De Uso página 14

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 21
F5. Turning off the night light
Whatever mode the night light (h) is in, press on the night light button (d) for 3 seconds to turn the function off.
G. TIMER FUNCTION (n) (o)
You can programme the length of time the night light (h) and music (l).
G1. Programming the night light (h)
Turn on the night light (h) (cf. F1).
Press and hold the night light button (d) and the mode button (b) together for 3 seconds. The night light timer icon (n) is displayed. Use the
+ and – adjustment buttons (e) to select the desired duration of operation (from 5 minutes to 1 hour). Press the Mode button (b) to confirm
your choice.
G2. Stopping the night light (h) programme
If you want to cancel the night light (h) programme, press the night light button (d) and the – adjustment button (e) sat the same time. The
night light timer icon (n) disappears.
If you want to turn the night light (h) off completely (interrupt the programme and turn the light off), press the night light button (d) for
3 seconds.
G3. Programming the music (o)
Turn on the music function (n). Select the desired melody (n) and volume for the programme. (cf. E).
Press and hold the music button (c) and the mode button (b) together for 3 seconds. The music timer icon (o) is displayed. Use the + and –
adjustment buttons (e) to select the desired duration of operation (from 5 minutes to 1 hour). Press the Mode button (b) to confirm your choice.
The music starts immediately.
G4. Turning off the music programme (o)
If you want to cancel the music programme (o) before the music starts, press the music button (c) and the – adjustment button (e) at the
same time. The music timer icon (o) disappears.
If you want to turn the music off completely (stop the programme and turn the light off), press the music button for 3 seconds.
H. ALARM CLOCK FUNCTION (p)
H1. Programming the alarm clock (p)
The alarm clock (p) programme will be configured to 12h or 24h format, depending on the option selected when setting the clock (i). Press
the mode and the + adjustment button (e) at the same time. The alarm icon (p) appears.
Press the mode button (b) again for 3 seconds. The hours will now blink. Adjust using the + and – adjustment buttons (e). Press the Mode
button (b) to confirm the setting. Proceed to set the minutes in the same way.
The alarm (p) is now on.
To check the time set, press on the mode button (b) and the + adjustment button (e) at the same time.
H2. Turning off the alarm (p)
When the alarm (p) rings, if you want the alarm (p) to ring at the same time the next day, press one of the adjustment buttons, + or – (e).
To turn off the alarm (p) before it rings, press the + and – adjustment buttons (e) at the same time.
If you do nothing when the alarm (p) rings, it will ring for 1 minute then will stop for 5 minutes. This action will be repeated until you turn
the alarm (p) off.
I. COMFORT INDICATORS (f) (g)
When the unit is turned on, various LEDs will light up. These LEDs concern both the temperature (j), and the humidity level (g) in the room:
- 5 LEDs on: Baby feels comfortable!
The temperature (j) is between 17 and 19 °C.
The humidity level (k) is between 40 and 49.9 %
- 3 LEDs on: Temperature (j) and/or humidity level (k) need to be monitored!
The temperature (j) is between 15-16 or 20-21 °C.
The humidity level (k) is between 30 and 39.9 % or 50 and 59.9 %
- 1 LED on: Temperature (j) and/or humidity level (k) at critical levels! Action needed immediately!
The temperature (j) is either less than 15 °C or more than 21°C.
The humidity level (k) is either between 0 and 29.9 % or above 60 %.
To turn the indicators (f) (g) off, press the night light button (d) and the music button (c) at the same time. To turn them back on again, press
the same buttons again.
- Always disconnect the power before cleaning the Baby Room Station.
- Clean using a slightly damp soft cloth or sponge. Allow to dry naturally. Never put the Baby Room Station into water or any other liquid.
- Never use scouring pads, abrasive or solvents for cleaning: they are liable to damage the Baby Room Station.
14
MAINTENANCE
BABY ROOM STATION • Instructions for use

Publicidad

Tabla de contenido
loading

Tabla de contenido