MOSQUITO LAMP
• strong air flows are not aimed towards lamp (open windows or air
conditioning).
• the lamp is placed to a minimum distance of 80 cm from nearby walls
• windows are closed, unless you have installed mosquito curtains
3. CLEANING
•
Turn off the lamp by pressing the switch on the back to clean the
electrified grid. Disconnect the power cord from the power plug,
then open the safety lid to remove dead insects by using a brush.
•
To reassemble the lamp: fix first the upper closure, then the lower
part. Press on the edges to reassemble.
•
Reconnect the lamp into a power outlet for using it again.
•
Do not use any volatile substance such as oil, solvent or alcohol to
clean the lamp.
4. WARNING
•
Make sure that power voltage and frequency correspond to lamp
specifications.
•
Do not touch the electrified grid when the lamp is connected to the
power grid or is in use.
•
Do not insert any metal objects into the lamp.
•
Do not expose the lamp to direct sunlight, high temperatures or
humidity or gas. Do not put the lamp in dusty places.
•
If the lamp is not used for a long time, please unplug the power cord
from the socket.
•
Do not pull the power cord to take out the plug. Please do it in
safely by holding the plug to pull it out of the socket. Should the
power cord be damaged, turn off the lamp by pressing the switch.
Have the damaged cable replaced by an authorized service center.
•
Keep away from children and babies.
7