OPERATION INSTRUCTION
This microwave oven uses modern electronic control to adjust cooking parameters
to meet your needs better for cooking.
1.Clock Setting
When the microwave oven is electrified, "00:00" will blink, buzzer will ring once.
1) Turn
knob to set the right time(between 00:00 and 23:59.)
2) After you have set the right time, press "
Note: 1) If you want to change the time, you have to press and hold the "
button for 3 seconds. The actuall time disappears and then the time will
blink in the display.
Turn
to confirm the setting.
2) If you do not want to see the clock in the display, press "
briefly. The time disappears. Press "
in the display again.
2. Microwave Cooking
1) Press the "
the display and the microwave icon appears. If no operation in 10 seconds, the
current power will be confirmed automatically.
2) Turn
knob to set the cooking time.
The max. cooking time depends on the power that has been set. When the power
is 900W, the MAX. time is 30 minutes and other powers are 90 minutes.
3) Press "
" button to adjust the power microwave power.
4) Turn
knob to set the microwave power (between 100W to 900W)
5) Press "
" button to start cooking.
NOTE: the step quantities for the adjustment time of the coding switch are as follow:
0---1
min
1---5
min
5---15 min
15---60 min
60 min
Microwave Power Chart
Microwave Power
Display
knob to set the new time and press the "
" button to activate the microwave function. "01:00" is blinking in
: 1 second
: 10 seconds
: 30 seconds
: 1 minute
: 5 minutes
100%
80%
900W
700W
GB
". The clock has been set.
" again, and the clcok appears
50%
450W
13
"
button
"
" button
30%
10%
300W
100W