Turntable Installation
Hub (underside)
Enamel tray
Turntable shaft
Important information about installing
•
This appliance is NOT intended for use in a commercial environment.
•
Please observe the installation instructions provided and note that this appliance
should only be installed by a quali ed technician.
•
The appliance is tted with a plug and must only be connected to a properly
installed earthed socket.
•
In case a new socket is needed, installation and cable connection must only be done
by a quali ed electrician. If the plug is no longer accessible following installation, a
pole disconnecting device must be present on the installation site with a contact gap
of at least 3 mm.
•
Adapters, multiway strips and extension cords must not be used. Overloading can
result in fire.
If the appliance is not fitted with a supply cord and a plug, the connection equipment
•
must have a contact separation in all poles that provide full disconnection, and the
appliance must be incorporated in the fixed wiring in accordance with the wiring rules.
GB
a. Never place the enamel tray upside down. The enamal
tray should never be restricted.
b. Both enamal tray must
c. All food and containers of food are always placed
on the enamel tray for cooking.
d. If enamel tray cracks or
nearest authorized service center .
The accessible surface
may be hot during
operation.
8
always be used during cooking.
breaks, contact your