Beper 40.102 Manual De Instrucciones página 22

EN
Error
message
Problem
The thermo-
meter is placed
incorrectly or
unsteady
The thermo-
meter is de-
tecting a rapid
environment
temperature
change
The thermo-
meter is not
functioning
properly
Temperature
measured is
higher than
43.0 °C (109.4
°F)
Temperature
measured is
lower than
32.0°C (89.6
°F)
22
Solution
Read instructions
for use thoroughly
and take a new
measurement
Allow the thermo-
meter to rest in a
place with room
temperature
between 10 °C
and 40°C (50°F –
104°F) for at least
30 minutes
Take the battery out
of the device, wait
for 1 minute and
put the battery back
on. If the message
reappears, contact
the supplier for
service
Read instructions
for use thoroughly,
then
check the integrity
of the
sensor cover and
take a new measu-
rement
Read instructions
for use thoroughly,
then
check the integrity
of the
sensor cover and
take a new measu-
rement