Rectifying Faults - BALAY 3EB8038L Instrucciones De Uso

Rectifying faults

Indicator Fault
Blank There is no power supply. Check the household fuse for the appliance. Check
E
is flashing The control panel is
damp or an object is
resting on it.
Er
+ number Appliance fault
F0
Appliance fault
F4
The electronics have
overheated and have
switched off the
appliance.
F6 F7
/ Appliance fault
F8
The appliance was in use You can switch the appliance back on again
for too long and has
switched itself off.
Malfunctions often have simple explanations. Please
read the following notes before calling the after-sales
service.
Action
whether there is a power cut by trying other
electrical appliances
Dry the control panel or remove the object. Then
touch any control panel.
Switch the appliance off and on again. If the
indicator does not go off, call the after-sales
service.
Switch the appliance off and on again. If the
indicator does not go off, call the after-sales
service.
Wait until the electronics have cooled down
sufficiently. Then touch any control panel.
Switch the appliance off and on again. If the
indicator does not go off, call the after-sales
service.
immediately.
57