OPERATION
APPLICATIONS
You may use this product for the purposes listed below:
Clearing leaves and other yard debris from your lawn
Keeping decks, patios, garages and driveways free from leaves, pine needles and other debris
STARTING/STOPPING THE BLOWER
See Figure 3-4.
A - Cord retainer
B - Loop
C - Plug
D - Extension cord
Attach the outlet end of an extension cord to the plug on the rear of the blower.
NOTE : Use only an approved outdoor extension cord as described previously in this manual.
Route the extension cord through the side of the loop located on the rear of the blower housing
and place underneath the cord retainer.
To start the blower, place the power switch in the ON position.
To stop the blower, place the power switch in the OFF position.
B
A
Fig. 3
C
D
12
ON
OFF
Fig. 4