Environmental Conditions - Reiner P3-MP Manual De Instrucciones

3. Storage

MP ink is fast-drying. The time it takes the print nozzles
to dry up depends on the ambient temperature
and the humidity.
Put the device into the station during short print breaks or
close the nozzle cover.
Observe acoustic signals of the device.
Where the device is not equipped with a nozzle cover, protect
the printing cartridge
3
cover when interrupting work.
To securely close the nozzles
keep the seal at the dust cover
Remove the printing cartridge
f
Guide the printing cartridge into the dust cover
f
Push the printing cartridge down until the
f
latching wings
Fasten the latching wings with the safety band
f
Use the print head within four weeks after opening.

4. Environmental Conditions

Temperature for storage
Temperature for transport
Fig. +
A B
2
against drying out with the dust
5
click.
+10°C to +20°C
-20 °C to +40 °C (up to 24
hours)
7
of the printing cartridge
3
free from dirt and dust.
2
out of the device.
7
2
,
3
.
4
.
10
GB