Environmental Conditions - Reiner P1-MP Manual De Instrucciones

4. Environmental Conditions

Temperature for storage
Temperature for transport
5. Troubleshooting
Dried ink on the print head nozzles
or reduced print quality.
5.1. Automatic cleaning
Read the information about the cleaning of the print head
f
nozzles
6
5.2. Cleaning the print head nozzles manually
If the automatic cleaning of the nozzles
desired result, we recommend proceeding as follows:
To remove dried ink, press a soft cloth, if necessary lightly
f
soaked in ethanol (spirits), against the print head nozzles
for about 3 seconds.
Dab off the dissolved ink and wipe the nozzles dry.
f
11
in the manual for the electronic stamp.
10°C to +20°C
-20 °C to +40 °C (up to 24 hours)
may result in streaks
6
does not produce the
6
6